Oak EBM-36

Oak automatic edge gluing machine EBM-36. All the best features you'd expect from an edge banding machine. Adapted to both large and small production volumes. 

 The following operations are performed: milling of the edge of the board, gluing of the edge, cutting of the glued edge from the roll, precise milling of the glued edge, shaving of the glued edge "cycles", polishing of the edge.

 Standard ​ ​ to rank:

-        Control panel from the feed side of the workpiece

-        The frame of the machine made of strong construction steel with reinforcements guarantees the stability of the working units

-        Feed conveyor made of pads covered with friction-resistant rubber, fixed on an industrial chain

-        The conveyor moves on two steel cylindrical guides (hardened and hardened steel), one round and the other flat, which ensure equal, even feed and resistance to side loads

-        The upper clamping beam is made of thick steel, mounted on 2 columns with two rows of rubberized clamping wheels

-        Frequency converter

-        Centralized chip extraction system

-        The workpiece support is pulled out along the entire length of the machine

-        Protective hoods in the areas of edge feeding and working units

-       Lockable main switch and motor overload protection

 Technical specification of the machine EMB-36 :

Plate length	Min. 150 mm.
Panel width	Min. 60 mm.
Plate thickness	10-60 mm
Edge width	12-65 mm
The size of the workpiece	Min. 300×60 150×150
Edge thickness	0.4-3 mm
Feed speed	12-20 m/min
Machine capacity	10 Kw
Pressure	0.6 bar
Controller	Delta
Management	Touch screen
Voltage	3PH 400V 50HZ
Dimensions of the machine (L×W×H)	3450×860×1550 mm
Weight	1200 kg.
Warranty	12 months

 

Price from 16,500 Eur.